STANDARD SPECIFICATION>
• Inflatable 3” unwind shaft.
• Inflatable 3” unwind shaft.
• Side lay adjuster to unwind shaft.
• Electronically controlled magnetic powder brake system for the unwind.
• End off roll stop.
• Web Edge Guide using 2 x web edge scanners for accuracy.
• Splicing table with paper clamps.
• Precision ground nip roller.
• Mitsubishi in feed system.
• Constant turning ceramic anilox boller.
• Anilox drop off prior to stopping to clean printing plate.
• Printing cylinder auto throw off.
• Quick change ceramic anilox rollers.
• Quick change rubber metering rollers.
• Reverse angle self adjusting doctor blade.
• Ink pan with outlet for ink pumping system.
• 360° lateral register adjustment.
• Longitudinal register adjustment.
• Single pneumatically inflated 3” rewind shaft.
• Electronically controlled magnetic powder clutch system for the rewind
• Pneumatic inflator gun and hose.
• Linear meter counter.

STANDARD EQUIPMENT
3 x full sets of chrome plated precision ground printing cylinders complete with gears and plate mounting guides.
1 x printing plate mounter.
1 x Toolbox.

PRINTING REPEAT LENGTH
Standard : Z56 - 112
Option 1 : Z65 - 145
Option 2 : Z75 - 170

MATERIAL SUBSTRATE
10 Micron Film To 400 Micron Board
Unsupported Film
Aluminium Foil
Tissue paper
Self adhesive paper
Vinyls/PVC
Carton weight board

OPTIONS
• Free standing unwind with roll lifter, roll diameter max 900mm.
• Corona Treater.
• UV Lamps 3.5kw.
• Turn Bar (please note the 320 turn bar has to be used for the 450, unless in the dual stack module).
• Lamination.
• Die stations (min 1, max 3).
• Additional printing units.
• Cold foiling.
• De-lamination/re-lamination.
• Back slitting unit.
• Video web inspection.
• Strobe.
• Die hoist.
• Chill rollers.
• Pressure jacks.
• Flat bed die cutter.